Clark, NJ 07066
ph: 732.340.9145
dsgkdryw
Installation Check List
Before Installation
- Please confirm with us that all rough inspections have passed: plumbing, electrical, framing and insulation.
- Electricity and water are directly available in the work area. If no electrical system is in place, please notify DSGK Drywall prior to the start date in order for us to have the appropriate generators and lighting for the job site when we arrive.
- Heating system is operational
- Clear a path through your home for easy access to the installation area and removal of debris.
- Clear the room or area around where the drywall is to be installed and/or finished so there is room to work.
- Move or cover furnishings to protect them from construction dust.
- Remove pictures from adjacent and nearby walls and breakables from the area so that vibrations from the installation work do not cause them to fall and break.
- Turn off central air system during installation and sanding.
- Turn off or disconnect any alarm systems BEFORE the installers come.
DSGK Drywall will advise you of the three hour time frame when the installers will arrive. Please insure the job site is accessible during this time period.
During Installation
- Keep children and pets away from the installation area.
- Maintain a temperature of between 50 and 70 degrees Fahrenheit as per manufacturers' recommendations.
- Please refrain from walking through the work area to avoid dragging dust, dirt and joint compound through the rest of your home.
Unexpected Site Conditions
In most cases, the estimate you receive will accurately reflect the condition of the installation site and it won't be necessary to adjust the cost and/or schedule. However, we occassionaly discover conditions (water damage, plumbing problems, etc.) during the installation that must be addressed before we can complete the project. These conditions may require additional labor and materials. If DSGK Drywall is to complete the necessary work, any additional charges must be approved by the homeowner prior to proceeding with the project, then added to your installation cost and then the schedule will be adjusted accordingly. If this is a multi-faceted project that you are over-seeing and there is an appropriate contractor on the project (plumber, roofer, etc.), you will need to schedule that contractor to perform the necessary work before we can complete your installation.
After drywall installation
When the installation process is complete, our installation team will:
- Remove drywall scrap from building to a dumpster provided by customer or area designated by customer.
After sanding
- Work area floor will be swept and left in "broom clean" condition.
Still have questions?
Call or e-mail us at:
(732) 340-9145
or
We accept
all major credit cards.
Copyright 2022 D.S.G.K. Drywall, LLC. All rights reserved.
Clark, NJ 07066
ph: 732.340.9145
dsgkdryw